Category Archives: Main Messages Menu

URGENT BUSINESS PROPOSAL FOR YOU FROM HONG- KONG

URGENT BUSINESS PROPOSAL FOR YOU FROM HONG- KONG

> Greetings!
>
> URGENT BUSINESS PROPOSAL FOR YOU FROM HONG- KONG
>
> It is understandable that you might be a little bit apprehensive because
> you do not know me, Please forgive this unusual manner to contact you, but
> this particular letter/email is of exceptional and very private nature,as
> by
> virtue of my vantage position in Hang Seng Bank Ltd -Hong Kong i have a
> lucrative business proposal of mutual interest to share with you.There is
> no
> way for me to know whether I will be properly understood, but it is my
> duty
> to write and reach out to you,TRUSTING that you will give this proposal a
> positive consideration.
>
> I am Mr.P. Lee a South Korean,54 years old and happily married with
> children, and i am a Director of Hang Seng Bank Ltd,in charge of the
> International Remittance department.I will need you to assist me in
> executing a business project from our bank worth US$25.5 Million.These
> funds
> were deposited with our bank by a customer of our bank who is a
> national{citizen} of your country,who unfortunately died in the December
> 2004 Asia Tsunami disaster .
>
> For more on this natural disaster click on these links:-
>
> The deceased account has been declared dormants since 2006 and these funds
> will be confiscated/declared unserviceable and turned over to the Hong
> Kong
> government if the deceased business associates or next-of-kin did not
> claim
> this money;since all efforts to trace any living relative of the deceased
> proved abortive,i have decided that i will have you claim this money as
> the
> deceased business associate/or next-of-kin,since you are from the same
> country and perhaps have some similarities in certain areas.Everything
> concerning this transaction shall be LEGALLY done without hitch,as i was
> the deceased account Officer and all the relevant documents of this
> deposit
> were kept under my care.
>
> Please endeavour to observe utmost discretion in all matters concerning
> this issue,as i hope that you are a sincere,honest,matured person and
> above
> all TRUSTWORTHY.Once the funds have been successfully transferred into
> your
> account, we shall share it in a ratio of 30% for you,65% for me and my
> assocaites in the bank and the reminder 5% to take care of contingencies.
>
> I will prefer you reach me on my private email address
> below:{ptchuglee@aim.com) and finally after that I shall furnish you with
> more information about this operation.I am counting on your anticipated
> co-operation for a successful and hitch free business transaction between
> us,that will be mutually beneficial,for a start oblige me these
> information:-
>
> 1.Your Full name{s}:-
>
> 2.Current contact address:-
>
> 3.Your present Occupation:-
>
> 4.Your age:-
>
> 5.Contact phone numbers{Office and Mobile{cell}:-
>
> Please if you are not interested delete this email and do not hurt me
> because I am putting my career and the life of my family at stake with
> this
> venture.Although nothing ventured is nothing gained,as it is said,the
> taste
> of the pudding is in the eating,do give this proposal SERIOUS AND POSITIVE
> CONSIDERATION.
>
> Your earliest response to this letter will be highly appreciated.
>
> Kind regards,
>
> Mr.Pt. Lee
> Hang Seng Bank Limited
> Hong Kong.{Asia}
> Tel/Fax:-852-3017 6607
> Email:-ptchuglee@aim.com ////// ptchuglee@aim.com
> PS;—SEND YOUR REPLY TO US STRICTLY THROUGH THIS E-MAIL ADDRESS FOR
> SECURITY/PRIVACY REASONS:- ptchuglee@aim.com

Professional mould maker and designer

From: hoda mould company=20
Sent: Wednesday, October 22, 2008 5:43 PM
Subject: Professional mould maker and designer

Dear Sir/Madam,

This is Sam, sales manager in Hoda Mould Company. Glad to know your =
company from the Internet, and we can see your company is outstanding in =
the industry. I am writing to explore the possibility of cooperation =
with you.

=20

Hoda Mould Company is a professional ISO9001 certified plastic injection =
and mould maker and moulder with more than ten years experience. We =
specialize in the design and manufacture of injection moulds and =
precision moulding/ production of plastic parts. We have state-of-art =
mould-making machinery, plastic injection moulding machines and over 400 =
skilled and dedicated workforce. Every year, over 70% of our moulds are =
exported to the United States and Europe for production.

=20

In addition to using steel P20 from China, we stock steel from Thyssen =
(Germany) and P20, H13, S7,420SS from Assab (Sweden), and etc. We choose =
steel depending on customers’ requirements and longevity of moulds. We =
use standard components from China, DME, and HASCO. Moreover, we use =
hot-runner molds from YUDO, DME, INCOE and etc.

=20

Our philosophy is to work with our customers in a collaborative way to =
ensure high quality products and low costs. For more information, please =
pay a visit to our website at

=20

If there is any project that we can assist you, please don’t hesitate to =
send us for quoting. We will respond to you within 2 to 3 working days. =
Let us demonstrate our capability and service to you.

=20

Your attention to Hoda Mould Company will be highly appreciated.

=20

Yours sincerely,

Sam Chen

Sales Manager

=20

Add: 202, Yikang Building, Paifang Road,Xinan District, Changan Town, =
Dongguan City, Guangdong, China..

Tel: +86-769-85345329

Fax: +86-769-85345319

Email: sam@hoda-mould.com